01
up to 2000 kN
Automatic compression tester
PILOT / Controls
- cylindrical and cubic specimens
- compression capacity up to 2000 kN
Equipment
Instruments for testing materials in the laboratory and on site. Model designations are the manufacturer’s own.
01
Laboratory and field instruments
02
up to 3000 kN
Automatic testing system
AUTOMAX / Controls
- cylindrical and cubic specimens
- compression capacity up to 3000 kN
- elastic and secant elastic modulus of concrete
- compressive strength and adhesion of cement and screed
03
up to 200 kN
Plate load test apparatus
Controls ASTM/BS/CNR/DIN
- capacity up to 200 kN
- plate size: 300 mm to 760 mm
04
up to 100 kN
Plate load test apparatus
Controls SWISS
- capacity up to 100 kN
- plate size: 300 mm
05
6 specimens · 8 bar
Water impermeability apparatus
Controls 55-C0246/6
- six prismatic and cylindrical specimens
- compressor with 8 bar maximum constant pressure
06
CBR · Marshall
Automatic CBR/Marshall test machine
Controls 70-T 0108/E
- California Bearing Ratio (CBR) on soils
- Marshall test on asphalt
- indirect tensile strength of asphalt
- uniaxial tests on soils and rock
07
50 blows / 55–60 s
Automatic impact (Marshall) compactor
Controls 76-B4432
- power rating: 800 W
- blow frequency: 50 blows in 55/60 s
- sliding mass: 4535 ± 15 g
- total hammer weight: 7850 ± 50 g
- free fall height: 457 ± 3 mm
08
25 blows/min
Proctor/CBR automatic compactor
Controls 33-T3613
- power rating: 650 W
- blow rate: 25 blows/min
- rammer weight: 2.495 / 4.535 kg
- rammer drop: 305 / 457 mm
09
⌀ 711 mm drum
Los Angeles abrasion machine
Controls 48-D0500/G
- power: 740 W
- inside drum diameter: 711 mm
- rotation speed: 31–33 rpm
10
50 kN jack
Field CBR test set
Controls 34-T0115/A
- in-situ determination of subgrade bearing capacity
- hand-operated loading press
- mechanical jack with 50 kN capacity
02
Diamond cutting and drilling
HILTI DS TS20-E
Automated wall-sawing system for horizontal and vertical cuts up to 73 cm thick in reinforced concrete, masonry and stone.
HILTI · ⌀ 600 mm
Diamond core drilling up to 600 mm in diameter and 120 cm deep — for pipes, cables and ventilation, and for taking cylindrical core samples.
Excavators and loaders with a full range of attachments for earthworks and demolition, plus automated systems for diamond cutting and drilling of reinforced concrete. Equipment for rent →